Changing Lamp on Epson Projectors EH-TW5900, EH-TW5910, EH-TW6000, EH-TW6000W, EH-TW6100
I am not exactly sure, what is the motivation here, but Epson seems to sell a projector lamp for these projectors in an assembly, in a plastic case with a lens and a reflector built together. It costs about 300 Euros on Amazon. It is also possible to buy just the lamp itself, the core of the module, and pay only 60 Euros for it! Here I shortly describe my experience with changing the lamp in my TW5910. The procedure should be the same for other projectors with ELP LP 68.
The fazit is to save your money and get one for 60 Euros if you can unscrew 4 bolts and screw them back again.
Disclaimer On this web site you might read about
or get access to various kinds of software and technology, including but not limited to libraries,
operating systems, software for communications, mobile phones and tablets,
Android software and Linux, even cars and motorcycles, security and penetration testing software,
software used in security research and forensics, some samples of software which can be
used (elsewhere) for malicious or illegal purposes. You will read about or be provided with
the ways to change it, to operate it and to use it. You might find advice and recommendations,
which are only an opinion, and not a legal advice or commercial recommendation..
Bear in mind, please, that everything you do, you do solely at your own risk
and responsibility. In no way the author of this web site, information, graphics
and other materials presented here or related to it can be made liable or
anyhow else responsible for your own actions as well as
actions of any third party and their direct or indirect results or consequences
with or without the use of this information as well as the software,
technology and systems mentioned and/or presented here,
no matter if developed by the author or by any third party.
In no way it is guaranteed that you will meet any suitability for
any particular purpose, safety, security, legality or even simply
functioning of the software and systems described here. You have to make
sure each time yourself, whether what you do, is really what you intend to
do, and that you are ready to be yourself responsible for. All the recommendations
and experiences described here are the opinions of corresponding authors and
are to be taken with care and own full responsibility.
The software provided
on or through this web site, linked to from this web site or anyhow else
related to this web site is provided by the corresponding authors on their
own terms. We provide all the software here as is without any guarantees to you.
You are responsible for deciding whether it is suitable for you or not.
You are also responsible for all direct or indirect consequences of using this
software.
Other web sites linked to from the current one are out of the author's control,
we can not guarantee anything about their content, its quality or even legality. We
can not be liable for any use of the linked to web sites or of the information presented there.
We reasonably try to keep this website running smoothly and to deliver
information to the best of our knowledge corresponding to the state of the art at the times
when the information is composed, usually presented together with the information, and out of good intents.
We can not however guarantee and can not be liable for this website being temporarily or permanently
unavailable, presenting unreliable information or software, or any other similar or not malfunctioning
or functioning not up to your expectations as well as any consequences
which might result from this site's operation.
After a few years of intensive use the lamp in my Epson EH-TW5910 stopped working. The projector blinked red and I had to replace.
I am not exactly sure, why paying for the plastic case you already have makes sense. Maybe it is about comfort, as the new lamp in the case can be simply plugged in into the projector and that is it. Maybe it is safety, as the lamp contains quicksilver Hg, and if broken represents a health risk. But if you feel skilled enough working with a simple screw driver, you can (fully at your own risk and for your own pleasure) exchange the lamp saving almost 250 Euros.
Here is my story. Instead of buying the original lamp, I bought this one: PJxJ LP68. Next, when delivered you'll have to exchange the lamp. Here is how I did it:
- Put on gloves, better some kind of plastic/resin gloves which do not leave any particles on the lamp
- Wait until the projector is cold and shut it off, unplug it.
- Take out the old lamp module out of the projector, you can pull the metallic spring for it. Remember how it should be placed back.
- Unscrew the plastic body, take out the old lamp.
- Put in the new lamp instead.
- Assemble and insert back into the projector
- Enjoy
Unfortunately I was not able to find a ready video or a photo set on how this is done, but in case of LP68 it was really dead-simple. Much easier than say in this case.
Some things to pay attention to: work on a clean and flat surface, do not let the lamps fall or break, they contain quick silver. Do not throw the old lamp in a simple household trash, recycle it properly, bring it where you have to according to the local law where you live. Insert the new lamp carefully in the casing, make sure a metal spring holding it fits well fixing the lamp steady in place, otherwise the lamp might squeak because of vibrations.
It is really that simple. Seems like this plastic sales story is one of the businesses where the manufacturer makes money on spare parts selling too much and way too expensive for not a single good technical reason imo.
Still, my experience with the new lamp was not exactly very smooth. First, it was squeaking and I had to reassemble. I put some copper grease in between the spring inside the casing and the lamp body. After reassembling the squeaking stopped. If you also decide to use grease there, make sure you use just a few. Use only heat-resistant grease. Make sure that when steaming it is not dangerous for your health, as the copper grease might be if you inhale too much of the steam later. I do not recommend it explicitly, do it at your own risk.
Next, the blue shadowing on the left of the projector's image got bigger. I find it a problem of the projector: the shadowing was there already from the very beginning when I bought it new.
Last, the brightness of the lamp is, in my opinion, better (!) than the one of the original. So in this regard I can only recommend it.
Generally I personally do not find these Epson projectors great. They are noisy and work reliably only in the standard mode. The quieter Eco mode isn't great. The original lamp was flashing slightly in the Eco mode, making web browsing impossible. Interestingly enough, the new lamp does not. Not so noticeable when watching movies, the flicker gets very annoying if you pay attention to the lighter scenes. 3D mode of my TW5910 is actually good, although I do not like the form of the glasses. They get reflections in the inside from all around the room. On the positive side: they are easy to use, and cost not a lot at the time of writing (February 2017).
I hope, my experience here could help some of you to take the decision and save money on the unnecessary spare parts.
Epson is a trademark of the Seiko Epson Corporation. Visit Epson here: https://epson.com/
Images copyright information
The lamps illustration on this website page was drawn by me.All rights for this image are reserved!!! You are not allowed to copy it, to reproduce it, to change it, to embed it or to otherwise use it!
Thanks for reading my blog!